Description

Frymaster FPRE417 CM 3.5 208/3 Details

For high-volume frying applications, the Frymaster FPRE417 200 lb. high efficiency floor fryer is the perfect choice. Designed to make frying easier, more economical, and smarter, this model features a proprietary long-life element design along with a thermostat that comes mounted directly on the element to ensure accurate temperature readings and extended oil life. It also includes an RTD 1-degree compensating temperature probe for superior accuracy and consistent results. The CM3.5 control set features a sleek touchpad interface, an LED display, a countdown timer (with audible alarm), and a 12-recipe programmable controller. This creates consistent results and a higher-quality finished product for your customers. It also features a controlled boil-out mode for cleaning the fryer, and a melt cycle to handle solid shortening blocks.

This model comes with (4) 50 lb. frypots that provide plenty of room to fry up your culinary creations, and since it comes with (2) twin fry baskets for each pot (for a total of 8), you can quickly cook portions of your customers’ favorite fried foods and separate by product type for better allergen and taste control. Each 50 lb. frypot is made of durable stainless steel to resist corrosion and make cleaning easier, and designed with a large cold zone and forward sloping bottom to help to collect and remove sediment, while a rear flush feature moves sediment toward the front 1 1/4″ IPS full port drain for thorough removal. The fryer cabinet features an enamel coating, with a stainless steel door design to provide extra protection where it’s needed most.

Additionally, this unit comes with a built-in filtration system, which makes the filtering process easier and encourages it to be done at recommended intervals. This increases the life of your oil, keeps fried foods tasting fresher, and ultimately makes your bottom line, and your customers happier! The system is built into the left 2 cabinet sections, with a large capacity filter pan that can be easily removed for cleaning and is designed to rest on rails to leave sufficient clearance for floor mats. The sloped design of the pan leaves minimal residual oil behind after filtering to reduce waste, and the large 3″ drain lets the oil flow freely so that filtration takes as little time as possible. A single filter cycle can take as little as 5 minutes. Plus, you can filter the oil from one frypot while still using the other one so that you don’t need to take your fryer completely out of service to run the filtration cycle. The filtration system features a 1/3 hp motor and a 4 gpm pump. For greater convenience, this oil filtration system comes complete with a stainless steel crumb catcher for sediment disposal and a filter starter kit.

It comes with a set of 6″ casters that make it easy to move the fryer for cleaning or service. Each frypot requires a 208V, 3 phase electrical connection, with a separate 120V electrical connection for the filtration and controls. It must be hard-wired, cords and plugs are not included.

Overall Dimensions:
Left to Right: 62 5/8″
Front to Back: 31″
Height: 45 3/8″